If you are lucky enough to live near a studio that offers classes as well as all the supplies you require, then take the time to drop in and soak up the ambiance. At the Mosaic Beach Studio, www.mosaicbeach.com, I was totally inspired by all the aids available to help anyone turn out a professional mosaic project, including a series of wrought iron tables, trivets, wood trays, vases, terra cotta pots and mirrors. There are also moulds for coasters, square plaques and garden stones.
Here are some tips from the pros. If your mosaic project is on an area that is difficult to reach or work on for a prolonged period of time, such as a backsplash, wall or floor, use the mesh method of applying the tiles. Draw your design on a piece of craft paper and tape it to your work table. Cover the craft paper with plastic film, then a sheet of mosaic mesh and tape down. Cut your tiles and use a bit of Weldbond to glue them in place on the mesh. You will be able to see the design through the mesh. Remember to leave space for grout around each tile piece. Once the pattern is complete, you will be able to peel off the plastic covered pattern and it's ready to install.
For exterior tables that are going to be exposed to harsh winters, use exterior grade plywood and cover it with a sheet of concrete board. Wood alone will contract and expand, which will ruin your mosaic. For all exterior projects, weldbond, exterior grade silicone or thinset mortar are the recommended adhesives.
Grouting is very important, it frames each tile and can ruin your work if it isn't applied well. Always use sanded grout, which comes in powder form and you add water to mix. It is recommended for all projects, inside and out. You can colour the grout with a little acrylic paint or tint.
It is a good idea to seal the grout on surfaces that may stain - table tops, trays, and floors. Choose a good quality sealer and apply until the grout no longer absorbs it. Reseal on an annual basis. Epoxy resin is an option if you want a super smooth, perfectly even surface.
To the reader who inquired about using mosaic tiles on her existing garden pavers, yes you can do this. Use thin set mortar to adhere the tiles and grout with a sanded grout. For those who want to apply tiles to glass, or laminate, yes to both. Apply a high quality primer to the laminate surface first for better adherence.
It's clear that this is a strong trend that not only looks great, but speaks to the artist in all of us.
Debbie Travis' House to Home column is produced by Debbie Travis and Barbara Dingle. Please email your questions to house2home@debbietravis.com.
